15 / 100 SEO Score

Features         Specification

R5089 5G NR CPE with WIFI 6

Product name: 5G CPE Model Name: R5089
Hardware requirements:
Master Chip Solution Qualcomm IPQ8072a+QCN5054+QCN5024+PMP8074
FLASH / Memory 256MB Nand /1GB DDR4
antenna 2.4G:4T4R    5.8G:4T4R    5G/LTE: 4T4R
hard disk Reserved SSD position, M.2 interface, compatible with 2280, 2242;
port 3 * 10/100 / 1000Mbps RJ45 (support blind plug in network port);
USB USB3.0*1
power supply AC IN /3PIN
Indicator light 5G networking indicator, WiFi indicator, power indicator, USB indicator, network port (comes with RJ45 connector)
Wireless Frequency Range 2.4~2.4835GHz、5.150GHz ~ 5.850GHz
Wireless rate 11b: 1/2 / 5.5 / 11Mbps
11g: 6/9/12/18/24/36/48 / 54Mbps
11n: up to 600Mbps
11ac: up to 2700Mbps
11ax: up to 4800Mbps
Working channel 2.4G:1~13
Spread Spectrum Technology DSSS (Direct Sequence Spread Spectrum))
Data modulation method 802.11a: OFDM (BPSK,QPSK,16-QAM,64-QAM)
802.11g: OFDM (BPSK, QPSK,16-QAM, 64-QAM)
802.11n: OFDM (BPSK, QPSK,16-QAM, 64-QAM)
802.11ac: OFDM (BPSK, QPSK,16-QAM, 64-QAM, 256-QAM)
802.11ax: OFDM (BPSK, QPSK,16-QAM, 64-QAM, 256-QAM,1024-QAM)
Medium Access Protocol CSMA/CA with ACK
data encryption WPA-PSK/WPA2-PSK、WPA/WPA2
Power (standard power) 2.4G:  11b: 16dBm ± 2dBm@11Mbps
11g: 14dBm ± 2dBm@54Mbps
11n: 13dBm ± 2dBm@MCS7
5.8G:  11ac (VHT80): 13dBm ± 2dBm@MCS9
Receiving sensitivity 2.4G: 11b: <-87dbm@11Mbps;
11g: <-71dbm@ 54Mbps;
11n (HT20): ≤ -68dBm@MCS7
11n (HT40): ≤ -65dBm@MCS7
5.8G:  11an (HT20): ≤ -69dBm@MCS7
11an (HT40): ≤ -65dBm@MCS7
11ac (VHT80): ≤ -55dBm@MCS9
5G module 5G NR n1/n2/n3/n5/n7/n8/n12/n20/n28/n41/n66/n71/n77/n78/n79
LTE-FDD (supports diversity reception) B1/2/3/4/5/7/8/9/12/13/14/17/18/19/20/25/26/28/29/30/32/66/71
TD-LTE (supports diversity reception) B34/B38/39/40/41/42/48
WCDMA BC1/2/3/4/5/6/8/19
5G SA Sub-6 Downlink: Up to 3.3Gbps, Uplink:250Mbps
4G Downlink: Up to 2.0Gbps,Uplink:150Mbps
Button Reset button 1 reset button, long press for 5 seconds to restore factory settings
POWER Short press to turn on, short press to turn off
LED lights POWER Power indicator, blue indicator is always on when power is connected
WAN The WAN is connected to the network cable, and the network cable is normal, and the blue is always on. When there is data transmission, the WAN indicator flashes blue.
LAN1 LAN1 is connected to the network cable, and the network cable is normal, and the blue light is always on; when data is being transmitted, the wan indicator flashes blue
LAN2 LAN2 is connected to the network cable, and the network cable is normal, and the blue is always on; when data is being transmitted, the wan indicator flashes blue
WiFi Wireless indicator light (always on, data transmission flashes)
USB Always on with USB access, data flashing
5G networking indicator 5G network is always on blue, 4G network is always on green, 3G / 2G network is always on in red, and network failure is blinking red
PCBA Size requirements Designing from DXF documents
interface WAN / LAN RJ45 interface 3*10/100/1000Mbps RJ45
SIM Card Micro SIM
USB USB3.0*1
Power interface AC  3PIN
Software requirements:
The main function 5G networking
11AX wireless access
status Router status
WiFi user connection status
4G network status
Language Requirements Chinese and English bilingual
The internet Network settings Dynamic IP mode, broadband dial-up mode, static IP mode, default dynamic IP
Mobile connection Data roaming, search operator, traffic settings
local area network DHCP setting, default LAN address is
wireless WiFi settings WiFi switch, name, password, protocol, bandwidth, channel, hidden
Black and white list Add (can be imported from user list), delete, move black and white lists
WPS PIN code access, PBC access
Advanced network settings IPv6 Four IPv6 networking modes: relay mode, static IP, dynamic IP, and broadband connection. IPv6 is disabled by default
APN APN related information will be automatically adapted according to the inserted SIM card
Guest network Off by default
Parental control Display the time period when the terminal’s MAC address is used to access the external network. You can configure the switch, device name, MAC address, access time, description, status, etc.
VPN Client There are two types of VPN client configurations: PPTP and L2TP
SMS Plug in a usable SIM card, you can send SMS, receive SMS, etc.
voice Phone settings Voice mode and caller ID mode can be set:
Voice mode: There are three modes, namely: CS only, VoLTE preffer, VoIP only, which is VoLTE preffer by default;
Caller ID mode: There are three modes, respectively: FSK, DTMF
Firewall ALG Enable FTP / PPTP passthrough / L2TP passthrough
Port Mapping
DMZ settings
MAC filtering
IP filtering
NAT settings Completely conical, symmetrical, address restricted cone, port restricted cone
DDOS Enable the network attack prevention function. When this function is enabled, the router will start the network attack prevention function. When a host is detected to attack the router, it will automatically limit its bandwidth
management SNTP
PIN management Fill in the PIN code of the SIM card. If you enter the wrong PIN code 3 times, the SIM card will be locked. You need to enter the PUK to unlock it.
Traffic Statistics Traffic statistics are used to visually show the use of broadband resources by intranet PCs
TR069 The management server in the network management model defined by the TR069 protocol is called the automatic configuration server (ACS), and is responsible for managing the user terminal equipment (CPE). The ACS server can complete restart, reset, and upgrade of CPE according to the TR069 protocol, which can implement the function of managing multiple routers
change Password
Backup, upgrade Download the backed up configuration and upload the backed up configuration
Restart, reset Includes immediate restart and scheduled restart
Modem For technical personnel only
Mobile page requirements Support APP management
Remote management Support remote viewing, login and upgrade management device
R5089 5G CPE Specification 1

Other Products