AceTel Logo
AceTel
Transportation & Commercial Fleet Logistics

Fleet Management & Commercial Vehicle Telematics Solutions

High-precision GPS/BDS vehicle trackers, 4G OBD telemetry gateways, and 5G in-vehicle smart terminals for real-time commercial fleet tracking, remote CAN diagnostics, driver behavior analytics, and passenger Wi-Fi.

Talk to Solutions Engineer
Multi-GNSS positioning (GPS, GLONASS, BeiDou, Galileo) with sub-2.5m CEP accuracy
Plug-and-play OBD-II / J1939 CAN-bus telemetry interface for instant diagnostics
In-vehicle high-speed 4G/5G Wi-Fi hotspot for passenger connectivity and mobile POS
Built-in 3-axis accelerometer for harsh braking, rapid acceleration, and crash detection
Ultra-low power sleep modes with internal lithium backup battery for anti-theft tracking

Real-Time Visibility and Intelligence for Commercial Vehicle Fleets

Fleet operators across freight transport, ride-hailing, public transit, and heavy machinery face escalating fuel costs, maintenance overhead, and compliance risks. Without continuous real-time telemetry, managers cannot detect aggressive driving behaviors, diagnose engine faults before catastrophic breakdowns occur, or optimize multi-stop delivery routes.

AceTel’s Fleet Telematics and Connected Vehicle Solution combines carrier-grade cellular positioning hardware with comprehensive in-vehicle telemetry interfaces. From compact OBD-II plug-and-play devices to hardwired IP67 trackers and advanced 5G On-Board Units (OBU), our hardware provides an unshakeable data foundation for modern Fleet Management Systems (FMS).


Core Operational Capabilities

1. High-Precision Positioning & Dead Reckoning

Featuring multi-constellation GNSS receivers (GPS, BeiDou, GLONASS, Galileo) coupled with Assisted GPS (A-GPS), AceTel trackers achieve cold start times under 30 seconds and real-time positioning accuracy within 2.5 meters. In urban canyons and underground tunnels, onboard Inertial Measurement Units (IMU) provide dead reckoning tracking without satellite lock.

2. Deep Engine Health & Telemetry Diagnostics

  • OBD-II & J1939 CAN-Bus: Read standardized PID data including instantaneous fuel consumption, diagnostic trouble codes (DTC), battery voltage, and throttle position.
  • Harsh Driving Detection: Integrated 3-axis G-sensors continuously monitor for harsh braking, sudden acceleration, excessive cornering, and rollover collisions.
  • Geofencing & Movement Alerts: Instantaneous SMS/MQTT alerts when vehicles enter or leave authorized geographic boundaries or experience unauthorized motion while parked.

3. In-Vehicle High-Speed Passenger & POS Connectivity

For public transit buses, luxury coaches, and emergency response vehicles, AceTel 5G/4G in-vehicle gateways deliver carrier-grade Wi-Fi with captive portal capabilities. Fleets can support credit card POS terminals, digital route signage, and passenger high-speed Internet simultaneously.


Telematics Architecture Workflow

[ Vehicle Engine / OBD-II / J1939 ] ──┐
                                     ├──▶ [ AceTel N2810 / T810 Tracker ]
[ 3-Axis Accelerometer / GPS Antenna ] ──┘                 │

                                                 (4G LTE / 5G Network)


                                           [ Central Fleet Cloud / FMS API ]

                                            ┌──────────────┴──────────────┐
                                            ▼                             ▼
                                    [ Dispatch Console ]       [ Mobile Driver App ]

Anti-Theft & Security Protections

  • Remote Ignition Cut-off: Integrated relay controls enable dispatchers to safely immobilize vehicles remotely upon confirmed theft reports.
  • Tamper & Disconnect Detection: Instant alerts when trackers are unplugged from the OBD port or disconnected from the primary 12V/24V vehicle battery.
  • Internal Li-ion Backup Battery: Keeps tracking alive for up to 72 hours even after the vehicle power source has been severed.
Recommended Hardware

Applicable Hardware Platforms for this Solution

These carrier-certified devices are optimized for integration within this solution architecture.

Browse full catalog
FAQ

Frequently Asked Questions

Key technical, architecture, and deployment inquiries regarding our Fleet Management & Commercial Vehicle Telematics Solutions.

Does the fleet telematics gateway support CAN-bus and OBD-II vehicle diagnostic protocols?
Yes, devices like the AceTel N2810 plug directly into standard vehicle OBD-II ports (ISO 15765-4, SAE J1939) to read real-time engine telemetry including fuel consumption, coolant temperature, RPM, diagnostic trouble codes (DTC), and odometer readings.
How does the tracker perform when the vehicle enters underground parking or remote dead zones?
AceTel telematics trackers incorporate flash memory data buffering. When cellular coverage is lost, GPS and sensor data continue to be recorded locally. As soon as cellular connection is restored, all buffered trip points are automatically uploaded in sequence.
Can in-vehicle devices provide both GPS tracking and passenger Wi-Fi simultaneously?
Yes, our mobile cellular gateways such as the N2810 and GN8 OBU integrate an onboard 4G/5G LTE module and 802.11 b/g/n/ac Wi-Fi, functioning simultaneously as a fleet tracker and a high-speed passenger mobile hotspot.
Direct Manufacturer & OEM/ODM

Request a Quote for Fleet Management & Commercial Vehicle Telematics Solutions

Tell us your target quantity, destination market and customization needs. Our sales engineers reply within 24 hours with pricing, MOQ options and lead time.

MOQ-Friendly Pilot RunsSamples in 3-5 Working DaysFull OEM/ODM Firmware & IDDirect FAE Engineering

Product Inquiry & Quotation

Direct FAE response within 24 hours. Prefer direct email?[email protected]